Model
AK1810
DC Output(0~40¡É)
0~18V / 0~10A
Resolution(Programming/Readback)
1mV / 1mA
Resolution(Meter)
1mV / 1mA

Programming Accuracy

± (% of output + offset)
V
±<(0.05%+15mV)
C
±<(0.10%+10mA)

Readback Accuracy

± (% of output + offset)
V
±<(0.05%+12mV)
C
±<(0.10%+7mA)

Ripple & Noise

(20Hz to 20MHz)
V
±<4mVp-p
C
±<2mArms

Load Regulation

± (% of output + offset)
V
±<(0.01%+2mV)
C
±<(0.01%+1mA)

Line Regulation

± (% of output + offset)
V
±<(0.01%+2mV)
C
±<(0.01%+1mA)

Voltage Programming Speed

Full Load(u:up, d:down)
u
10msec
d
13msec


   Transient Response Time - Less than 50us for output recover to within 15mV following a                                               change in current output from full load to half load

 

   ¡Ø The above specification is measured from its front output terminals after 1 hour warm-up        and recalibration at 25¡É, ±(% of operating output+offset).

   ¡Ø In case of using rear output terminals or remote sensing facilities, new calibration is         required. Please study the calibration procedure in the ¡°User¡¯s Guide¡± before performing         new calibration.

   ¡Ø Standard Input Voltage : 220Vac±10%/48~62Hz, Optional inputs are available.

 
    >> IMAGES    >> Specifications                                                                           Click for more specifications !!  

      * Single Display

      * Dual Display

      * Interface

      * Single front output

      * Single rear output

      * Dual front output

      * Dual rear output

      * K Dual Knob & buttern

      * K Dual left side

      * K Dual right side

  

Model

AK1205

AK1810

AK3003

AK3005

AK3010

AK6003

  

Voltage

12V

18V

30V

30V

30V

60V

  

Current

5A

10A

3A

5A

10A

3A

  

Watt

60W

180W

90W

150W

300W

180W

  
 

   >> Features

      • Bench-top and 19-inch standard rack mountable

      • Self-compensation by monitoring output and display

      • CV/CC mode automatic crossover by setup limit

      • Storable up to 10 settings at each output port

      • Pattern output operation

      • Power fail feature to recall the latest setting value

      • DUT protection by OVP & OCP

      • Rear output enable